空间谱估计经典算法性能比较

空间谱估计是阵列信号处理的一个重要研究方向。空间谱估计理论与技术已日趋成熟，近几十年的经典谱估计技术包括：常规波束形成（CBF）、Capon谱估计、多重信号分类（MUSIC）、旋转不变子空间算法（ESPRIT）、最大似然（ML）、子空间拟合（SF），及这些算法的扩展和变形。上述算法在各个分散的文章中均有具体深入的理论分析和研究，亦有类似的2种或3种算法的性能比较，但是针对这些所有算法的性能比较，就笔者所知尚无公开报道，而使工程实现时对算法的选择没有依据。本文对这些经典算法做了简介，列出各个算法的优缺点，并对性能进行仿真比较，能直观地得到各个算法的性能对比，给工程实现算法选择提供理论依据。     

A systematic approach to nonlinear rotorcraft model identification

The development of a powerful parameter estimation routine and its integration into the simulation environment HOST is described. With this tool approaches are being made towards new strategies of mathematical modeling, aimed at providing highly accurate and nevertheless run-time efficient simulation models. The identification routine is capable of optimizing parameterized models in both dynamic time domain simulation and static (e.g. trim state variation) conditions. Examples of both cases are presented to emphasize the improvement in the system response prediction and to demonstrate the abilities of the identification techniques in combination with the nonlinear simulation platform. This article reviews the activities and achievements accomplished by the DLR Institute of Flight Research and the ONERA Systems Control and Flight Dynamics Department during the last few years in the research on rotorcraft flight dynamics modeling and model identification. Future activities that require extensive high fidelity modeling are in the scope of the current and coming modeling activities that include the use of the presented methods and software technologies.     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.     

美国低空风切变危险性评估的研究概况

对美国在低空风切变的危险性评估及其准则、风切变模型及地面系统仿真等方面的研究概况作一介绍,最后找出我国在这方面研究的差距,并提出努力的方向。     

基于偏最小二乘回归分析的装备研制费用估算方法及应用

介绍了寿命周期费用的概念以及各阶段分布情况;针对经典回归分析的不足,采用偏最小二乘回归分析对某装备样本数据进行分析建模;建立了研制费用与几个相关指标的回归方程,并将估算结果与经典的回归分析进行对比,验证模型的合理性。该模型能较好地反映了费用与各指标之间的关系,对后续寿命周期费用的分析与控制有一定的意义。     

静止单站纯方位目标航向估计及仿真研究

针对平面直角导航坐标系下匀速直航目标, 利用静止单站测得目标方位序 列, 基于纯方位目标运动分析(BO-TMA)理论, 采用拟线性处理方法, 对目标航向进行 递推式估计。通过多次仿真实验,研究了不同初始条件对目标航向估计性能的影响。该 方法要求简单,便于实现,所得结论为水下隐蔽单站仅利用目标方位信息快速判断敌方 运动态势及作战决策提供了参考。     

Distributed state estimation for heterogeneous mobile sensor networks with stochastic observation loss

The problem of distributed fusion and random observation loss for mobile sensor networks is investigated herein. In view of the fact that the measured values, sampling frequency and noise of various sensors are different, the observation model of a heterogeneous network is constructed. A binary random variable is introduced to describe the drop of observation component and the topology switching problem caused by complete observation loss is also considered. A cubature information filtering algo...     

一般概率测度的核估计

在测度弱收敛的意义下，研究了一般概率测度μ的核估计μn，得到了它的渐近无偏性、强相合性及在给定条件下的收敛速度。     

机翼重量分配方法在轻型飞机中的应用

针对目前飞机初始设计阶段的机翼重量估算公式变量较多，条件限制因素较复杂的情况，提出了一种按照机翼重量分配来估算重量的方法。把机翼重量分配到：承弯结构、承剪结构、分布气动载荷结构、起落架影响结构、前后缘结构、襟副翼机构，燃油影响结构、以及其它附属结构。此方法已经在大型飞机的机翼重量估算上取得了良好的效果。通过与一系列常用机翼重量估算公式的对比分析，并且利用已知的10种轻型飞机完成了算例，结果证明此方法有很强的适应性。     

基于卫星观测数据的弹道导弹初始状态估计

利用卫星探测数据对大气层外飞行的弹道导弹弹道进行估计。在极大似然估计中,由于卫星探测导弹运动的可观测性较差,使初始点估计变得十分病态,传统的Gauss Newton迭代算法不再适用,而采用较为复杂Levenberg Marquardt算法,分别对单颗卫星和两颗卫星的情况进行了Monte Carlo仿真,得到了各自的归一化残差测量误差(代价函数),结果表明该算法有效。